科技的飛速發展讓人們對不同領域的知識都有了一定的涉及，人們可以通過很多渠道獲得自己想要的，冷再生機租賃公司的工程師提到其設備是一種道路施工中常用的機器，在此今天就給大家介紹一下使用冷再生機施工的優勢體現在如下5個方面：

With the rapid development of science and technology, people are involved in different fields of knowledge. People can get what they want through many channels. The engineers of the cold recycling machine rental company mentioned that its equipment is a kind of commonly used machine in road construction. Today, we will introduce the advantages of using cold recycling machine in construction, which are reflected in the following five aspects:

1、簡化了施工過程。由于冷再生機銑工作是將原有的舊路面材料碾碎，在車體內，將碾碎的廢骨料在攪拌腔中攪拌直接攤鋪，省去了新骨料的挖掘、運輸、攪拌站拌和加工、攤鋪機攤鋪等一系列工作。，簡化了施工過程。

1. The construction process is simplified. Because the cold recycling machine milling work is to crush the original old pavement materials, in the car body, the crushed waste aggregate is mixed in the mixing chamber and directly spread, which saves a series of work such as digging, transportation, mixing and processing in the mixing station, spreading by the paver and so on., The construction process is simplified.

2、避免道路施工造成的交通堵塞問題。由于冷再生機械在施工過程中省略了攪拌站的運輸和攪拌過程，施工現場的設備投資相對較小。這有效地減少了由于道路建設而造成的交通流量，并產生了較大的負荷。因?yàn)槔湓偕鷻C(jī)是在施工和道路施工過程中，我們可以選擇半路施工和半路施工，這樣可以在不影響交通正常使用的情況下修路。

2. Avoid traffic jam caused by road construction. Because the cold recycling machinery omits the transportation and mixing process of the mixing station in the construction process, the equipment investment on the construction site is relatively small. This effectively reduces the traffic flow caused by road construction, and produces a larger load. Because the cold recycling machine is in the process of construction and road construction, we can choose half road construction and half road construction, so that we can repair the road without affecting the normal use of traffic.

3、施工效率高。傳統的筑路工藝是先用銑刨機對廢棄路面進行碾磨，然后運攪拌站進行攪拌處理，再運回施工現場用攤鋪機攤鋪、壓路機碾壓。在施工過程中，現場冷再生機械屬于一次性成型(即冷再生機械一次通過待修復道路后完成銑、拌、鋪筑)，以便隨著施工進度的推進陸續打通已完工的道路。它可以大大縮短維護路面和提早開 放交通所需的時間。

3. The construction efficiency is high. The traditional road construction technology is to grind the abandoned road surface with milling machine, then transport it to the mixing plant for mixing treatment, and then transport it back to the construction site for paving with paver and rolling with roller. In the construction process, the on-site cold recycling machinery belongs to one-time molding (that is, the cold recycling machinery can complete milling, mixing and paving after passing through the road to be repaired at one time), so as to open up the completed roads with the progress of construction. It can greatly reduce the time required to maintain the road surface and open the traffic ahead of time.

4、保護生態環境，從而有效的節約資源和能源。由于冷再生機銑后的廢料幾乎全部可以直接送入攪拌倉進行地面攪拌攤鋪，減少了新石料的開采，不需要考慮廢料的運輸和堆放。保護了環境。冷再生器在工作中不需要加熱和混合物料，節省了大量能源。冷再生機是對廢舊路面原材料進行再利用的一種設備。它沒有污染，因此被稱為綠色建筑技術。

4. Protect the ecological environment, so as to effectively save resources and energy. Since almost all the waste materials milled by the cold recycling machine can be directly sent to the mixing bin for ground mixing and paving, the exploitation of new stone materials is reduced, and the transportation and stacking of waste materials are not considered. It protects the environment. The cold regenerator does not need to heat and mix materials in operation, which saves a lot of energy. Cold recycling machine is a kind of equipment to recycle the raw materials of waste pavement. It has no pollution, so it is called green building technology.

5、有效的降低了施工成本。與傳統施工方法相比，冷再生機械租賃后在施工過程中省略了大量的設備、人員和材料，相對成本就比較低。

5. The construction cost is effectively reduced. Compared with the traditional construction method, a lot of equipment, personnel and materials are omitted in the construction process after the cold recycling machinery leasing, so the relative cost is relatively low.