攤鋪機的選型必須從四個方面確定攤鋪機的選型必須緊密地結合道路施工的具體情況和需求，要遵循充分滿足道路質量和合理成本等要求。下面冷再生機租賃廠家為您講解四個方面：

The type selection of paver must be closely combined with the specific conditions and needs of road construction, and should fully meet the requirements of road quality and reasonable cost. The manufacturer of the cold regeneration machine rental will explain four aspects to you:

1、低速高密實度攤鋪的理念

1. The concept of low speed and high density paving

目前我們施工應用攤鋪機產品大多數是低速高密實度形式的攤鋪機。它具有具有可提高攤鋪平整度，減少材料浪費和減少壓實遍數等優勢。實際施工證明：采用低速高密實度攤鋪機，要比快速攤鋪機更合理，在有效地保證質量的同時，還能適當降低成本。

At present, most of our paver products are low speed and high density paver. It has the advantages of improving the smoothness of paving, reducing material waste, and reducing the number of compaction passes. The actual construction has proved that it is more reasonable to use a low-speed and high density paver than a fast paver, which can effectively ensure the quality while properly reducing the cost.

2、履帶式和輪胎式的選擇

2. Selection of track and tire type

履帶式攤鋪機履帶接地面積大，具有攤鋪作業過程中附著牽引力性能良好,不易打滑，同時可起到更好的攤鋪濾浪作用，提高攤鋪平整度、平穩性。公路大規模的連續攤鋪作業很少轉移工地，故履帶式攤鋪機更適合公路施工，而城布道路施工，如果轉移過多，則選用輪胎式更適宜。

Crawler paver has large track grounding area, good adhesion and traction performance during paving operation, and is not easy to slip. At the same time, it can play a better role in paving and wave filtering, and improve paving flatness and stability. Large scale continuous paving operations rarely transfer the construction site, so crawler paver is more suitable for highway construction, while for urban road construction, if there are too many transfers, tire type is more suitable.

3、采用穩定土攤鋪機進行基層攤鋪

3. Use stabilized soil paver for base course paving

采用自行研制的性價比較為合理的國產穩定土攤鋪機進行進路基層穩定材抖的攤鋪，替代平地機攤鋪方式，由于攤鋪平整度較好，及路邊緣整齊，可減少10%-15%材料浪費，減少壓實遍數，提高生產效率等，尤其可以保證公路基層良好的施工質量。

The self-developed domestic stabilized soil paver with reasonable cost performance ratio is used to pave the stable material of the access base instead of the grader paving method. Due to the good paving flatness and neat road edges, 10% - 15% material waste can be reduced, the number of compaction times can be reduced, and production efficiency can be improved, especially to ensure the good construction quality of the road base.

4、攤鋪機生產能力及數量確定

4. Determination of production capacity and quantity of paver

為保證運到攤鋪現場的瀝青混合料能夠及時攤鋪完畢，在選擇攤鋪機時應考慮其實際攤鋪能力應略大于拌合設備的實際拌合能力，或者在選定的前提下，去確定拌合設備的實際生產能力。

In order to ensure that the asphalt mixture transported to the paving site can be paved in time, the actual paving capacity of the paver shall be slightly greater than the actual mixing capacity of the mixing equipment, or the actual production capacity of the mixing equipment shall be determined on the premise of selection.

攤鋪機的作業速度對攤鋪機的作業效率和攤鋪質量影響很大，正確選擇攤鋪作業速度，是加快施工進度，提高攤鋪質量的重要手段，選擇的原則是保證攤鋪機作業的連續性。更多相關事項就來我們網站http://www.393444a.com進行咨詢！

The operation speed of the paver has a great impact on the operation efficiency and paving quality of the paver. The correct selection of the paving operation speed is an important means to speed up the construction progress and improve the paving quality. The principle of selection is to ensure the continuity of the paver operation. For more related matters, come to our website http://www.393444a.com Consulting!