瀝青路面改造或養護如繼續采用傳統方式，不僅增加了重修路面所需的瀝青和砂石材料，而且易造成環境污染。如果采用冷生技術，將瀝青面層和基層舊料加以再生利用，不僅可以節約大量的筑路材料，充分利用舊路材料，恢復和提高舊路強度，還有利于節約能源，避免環境污染，降低工程造價。

If the asphalt pavement is reconstructed or maintained in the traditional way, it will not only increase the asphalt and gravel materials required for pavement repair, but also easily cause environmental pollution. If the cold production technology is adopted to recycle the old materials of asphalt pavement and base course, it can not only save a lot of road materials, make full use of the old road materials, restore and improve the strength of the old road, but also save energy, avoid environmental pollution and reduce the project cost.

因此，舊瀝青路面材料的再生利用就成為構建節約型社會、社會、綠色社會的重要課題。下面冷再生機出租廠家為您分析。

Therefore, the recycling of old asphalt pavement materials has become an important topic in building a conservation oriented society, an environmental protection society and a green society. The following cold regeneration machine rental manufacturers analyze for you.

水泥穩定就地冷再生，就是在經再生機(或銑刨機)按規定的深度、行進速度和轉子速度進行銑刨后得到的具有一定級配的水穩混合料(要時加入-定比例的新料)中，加入-定劑量的水泥，在佳含水量狀態下拌和形成再生混合料，通過整形、碾壓、養生形成符合設計要求的道路基層或底基層的工藝技術。

Cement stabilization in place cold recycling is the process technology of adding a certain amount of cement into the water stabilized mixture with a certain gradation (new material with a certain proportion when necessary) that is milled by a recycling machine (or milling machine) according to the specified depth, travel speed and rotor speed, mixing the mixture with a good water content to form a recycled mixture, and shaping, rolling and curing to form a road base or subbase that meets the design requirements.

就該技術材料形成的工藝要求來講，與其他傳統再生技術過程是近似的，都需要經過回收、破碎，要有一定的級配，并加入適量的穩定劑(水泥、瀝青等)，在 常溫情況下重新拌和，形成具有一定路用性能的再生混合料。但在施工工藝方面卻有較大的區別，就地冷再生是基于特別的施工機械及組合，在舊路再生現場集銑刨、破碎、摻配、拌和、攤鋪、整平、壓實等工序于一體的工藝方式，整個過程一氣呵成， 工序上節約了時間，提高了再生效益。

In terms of the process requirements for the formation of this technical material, it is similar to other traditional recycling technology processes. It needs to be recycled, broken, graded, and added with an appropriate amount of stabilizer (cement, asphalt, etc.). It can be remixed at room temperature to form a recycled mixture with a certain road performance. However, there is a big difference in the construction process. On site cold recycling is a process based on special construction machinery and combination, which integrates milling, crushing, mixing, mixing, paving, leveling, compaction and other processes at the old road recycling site. The whole process is completed in one go, saving time in the process and improving the recycling efficiency.

水泥穩定就地冷再生的相關概念就講解到這里了，如果您有需求就要了解更為詳細的信息，關注我們http://www.393444a.com，讓您得到更多信息！

This is the end of the related concepts of cement stabilized in-situ cold regeneration. If you need more detailed information, please pay attention to us http://www.393444a.com , let you get more information!