冷再生機是工地作業中常用的一種機械，可以有效的幫助施工的工人們加快工作效率和提高工程質量。下面冷再生機出租廠家來講講冷再生機的優勢以及正確的操作方式相關內容吧。

Cold recycling machine is a kind of machine commonly used in construction site operation, which can effectively help construction workers to speed up work efficiency and improve project quality. Next, let's talk about the advantages of the cold regenerator and the correct operation mode.

冷再生機的優勢

Advantages of cold regenerator

1、施工工序簡單化。

1. The construction process is simplified.

2、防止因道路施工而引起交通的堵塞。

2. Prevent traffic jam caused by road construction.

3、施工效率高。

3. High construction efficiency.

4、保護環境、節約能源和資源。

4. Protect the environment and save energy and resources.

5、降低施工成本。

5. Reduce construction costs.

冷再生機正確的操作方式

Correct operation mode of cold regenerator

1.使用后控制臺時，需將開關撥到后控制，此時前控制臺無作用，此外各個小噴頭開關可以使用后控制臺打開、關閉。

1. When using the rear console, you need to turn the switch to the rear control. At this time, the front console has no effect. In addition, each small nozzle switch can be turned on and off using the rear console.

2.乳化瀝青設備不能灌的太滿，加油口蓋須關緊，運輸過程中以防瀝青溢出。

2. The emulsified asphalt equipment shall not be filled too full, and the filler cap shall be tightly closed to prevent asphalt overflow during transportation.

3.乳化瀝青設備在噴灑前一定要檢查各閥門位置是否正確。加入乳化瀝青設備內的熱態瀝青須達到160~180℃的工作溫度，長距離運輸或工作時間過長，可使用加溫裝置保溫，但不能當作熔油爐。

3. Before spraying, the emulsified asphalt equipment must check whether the position of each valve is correct. The hot asphalt added into the emulsified asphalt equipment must reach the working temperature of 160~180 ℃. If it is transported for a long distance or the working time is too long, the heating device can be used for insulation, but it cannot be used as an oil melting furnace.

以上就是關于冷再生機優勢以及冷再機的正確操作方式的介紹，希望對大家有所幫助。如果您還有其他方面的問題或是疑問，歡迎咨詢我們的在線http://www.393444a.com客服。

The above is about the advantages of the cold regenerator and the correct operation mode of the cold regenerator. I hope it will be helpful to you. If you have any other questions, please contact us online http://www.393444a.com customer service.